Anticorrosive equipment / Other
| Standard disc condenser |
| || 1. Due to the use of smaller single-hole openings (crossed by 180 ° with each other), the failure has increased fluid resistance and uneven gas distribution, which is prone to bias flow, which is not suitable for use in high vacuum situations. |
2. The thickness of the single sheet is large, the cooling water flow rate is slow, it is easy to scale, and the heat exchange efficiency is low.
3． Generally, gaskets of more than 20mm are used, which have large expansion and contraction, easy deformation and low pressure resistance, and are not suitable for vacuum sealing.
|New disc condenser|
| 1. To improve the shortcomings of general chip condensers, a new type of chip condenser has been introduced. This equipment can be used in high vacuum distillation and evaporation devices, which improves the pressure drop and solves the problems of easy leakage. |
2. Reduced the thickness of the single sheet and increased the cooling water flow rate; the six-hole design is used to evenly distribute the fluid. Compared with the standard condenser of the same area, the heat transfer efficiency is improved by more than 50%, and it is not easy to scale.
3． 10mm thick gasket, small expansion and contraction, high pressure resistance, suitable for high vacuum sealing.
- company name:
- Jiangsu Gonglin Chemical Equipment Co., Ltd.
- Chen Jinping
- contact number:
- Contact Fax:
- contact address:
- No.1 Weiliu Road, Yubao North Road, Chengbei District, Jingjiang City
- Postal code: